Skip to content
Free on-site quotes across Melbourne's east and south east (03) 4328 3911
Melbourne Driveway Concreters
  1. Home
  2. Areas
  3. Inner East
  4. Doncaster

Concrete driveways in Doncaster

Plain, exposed aggregate and coloured concrete driveways for Doncaster homes, properly prepped and reinforced with steel mesh, with one fixed written quote. A City of Manningham crossover permit may be required.

  • Prepped area cleared and base to suit the ground
  • Steel mesh reinforcement in every driveway
  • Fixed written quote after a site measure

Get a free driveway quote

We look forward to working with you and creating an outstanding finish.

Or call (03) 4328 3911

Free site measure Plain, exposed aggregate and coloured Insured contractor Melbourne's east, south east and bayside

Concrete driveways in Doncaster, 3108

Concrete driveway installation for Doncaster homes, from the 1970s houses on the large sloping blocks around Doncaster Hill to the rebuilt homes towards Templestowe. Every driveway is properly prepped and reinforced with steel mesh. A Manningham City Council vehicle crossing permit may be required for the crossover.

Slope and grade in Doncaster

Doncaster is one of the hilliest suburbs in Melbourne’s east, and most blocks have a meaningful fall to or from the street, often with a deep nature strip. The driveway grade is set so a standard car clears the change of level at the crossover, which Manningham checks as part of the permit. On steeper driveways a broom finish or exposed aggregate is recommended for grip.

Ground conditions in Doncaster

The soil is a clay that moves with the seasons, and original driveways poured directly onto it have generally cracked. A replacement is excavated to firm ground and prepped, with base material brought in and compacted where the ground needs it, a membrane where required and steel mesh reinforcement, with control joints to direct any movement. Long driveways on the larger Doncaster blocks may need additional expansion joints and a mid-length drain.

Finishes suited to Doncaster

Exposed aggregate in charcoal or mid grey stone is the standard specification on the contemporary rebuilds across Doncaster. On steeper driveways a broom finished plain driveway offers the best traction at the lowest cost.

Concrete driveway cost in Doncaster

A standard single driveway in Doncaster is 40 to 50 square metres. Plain concrete with a broom or trowel finish runs $95 to $130 per m², coloured concrete $115 to $160 and exposed aggregate $130 to $185, all supplied and laid with the base preparation described above. Removal of an existing driveway adds $35 per m². A replaced single driveway in exposed aggregate typically falls between $7,500 and $10,000, and the quote issued after the site measure is fixed. The driveway cost guide sets out what moves the price.

City of Manningham crossover permits

Doncaster, Templestowe and Bulleen blocks are often on a slope with a deep nature strip, so the crossover gradient matters. Manningham checks the driveway won’t scrape a standard car at the change of grade.

Manningham requires a vehicle crossing permit for new or altered crossovers, with construction to council specification and a nature strip reinstatement bond in some cases.

Council permit information

Nearby suburbs we also cover

. See the full Inner East list.

Process

From enquiry to a driveway you can park on

  1. Enquiry

    Call or send the form with the suburb and the type of driveway. A site measure is booked, usually within a few days.

  2. Site measure and fixed quote

    Dimensions, fall, access and drainage are assessed on site. A council crossover permit may be required for the street section. The written quote is fixed.

  3. Preparation and pour

    Existing surface removed and the area prepped, with base material brought in where needed. Mesh laid, crossover formwork inspected by council, then the pour. Most residential driveways are one day on site.

  4. Cure and seal

    Vehicles off for seven days. Exposed aggregate is sealed after the concrete has cured.

Specification

How our driveways are built

Two quotes can look the same on paper and be very different underground. This is what is included in ours. Full specification.

Preparation

The old surface removed and the area prepped, with base material brought in and compacted where the ground needs it. Preparation is where most cheap driveways fail.

Reinforcement

Steel mesh reinforcement and 25 MPa concrete, with a thicker slab and heavier mesh quoted where caravans and trucks will park.

Drainage

A fall away from the house, and a grated drain across the garage threshold where the block falls in.

Joints and cure

Control joints cut to direct any movement. Seven days before vehicles, and exposed aggregate sealed after cure.

Doncaster driveway questions

Is a permit required for a driveway in Doncaster?

Manningham requires a vehicle crossing permit for new or altered crossovers, with construction to council specification and a nature strip reinstatement bond in some cases.

What does a concrete driveway cost in Doncaster?

Plain concrete $95 to $130 per m², coloured $115 to $160, exposed aggregate $130 to $185, supplied and laid with base and reinforcement. A typical Doncaster single driveway is between $4,500 and $8,500 depending on finish and whether an existing driveway is removed.

How quickly can a site measure be arranged in Doncaster?

Site measures in Doncaster are generally scheduled within a few days of enquiry.

Call (03) 4328 3911 Get a quote